- Leece Neville bearing 35624
- PRESTOLITE / LEECE-NEVILLE ALTERNATORS & SPARE PARTS
- Leece Neville ball-bearing. ID: 25mm, OD: 62mm, Width: 25mm.Bearing Type: Double Sealed, Industry Number: W305-2RS. Wide Version of 6305-2RS (=17mm).
- €20.00 (excl. VAT)
- Add to cart
- Valeo Alternator Original OE 37300-4A310
- MISCELLANEOUS ALTERNATORS & SPARE PARTS
- 12V - 110Amp
- €239.00 (excl. VAT)
- Add to cart
- Delco Alternator Original OE 37300-04950
- DELCO REMY ALTERNATORS & SPARE PARTS
- Delco alternator, 12V -130A
- €352.00 (excl. VAT)
- Add to cart
- Leece Neville bushing 38401
- PRESTOLITE / LEECE-NEVILLE STARTERS & SPARE PARTS
- Leece Neville Bushing. ID18.800 mm, 25.4mm OD, 19mm W.Used as nose housing and comm. end bushing in starters MS1-401A, MS7-501, MS7-501A, MS7-502, MS7-502A, MS7-507, MS7-507A, MS7-509, MS7-509A, MS7-510, MS7-510A
- €15.00 (excl. VAT)
- Add to cart
- Facet pump 40007
- FACET & PUROLATOR PUMPS DRIVES
- Facet pump, 12 Volt, 4 - 5.5 PSI, Interruptor type
- €173.00 (excl. VAT)
- Add to cart
- Facet pump 40104
- SOLID STATE PUMPS
- Facet Solid State pomp, 12V
- Read more
- Facet pump, 12V 4.5PSI 40105
- SOLID STATE PUMPS
- Facet Fuel Pumps, Solid State Fuel Pump, 12V, 3-4.5PSI, 30.48cm Min Dry.
- €105.00 (excl. VAT)
- Add to cart
- Facet pump, 12V 40106
- SOLID STATE PUMPS
- Can use: Facet part number 40106 KIT. Facet Fuel Pumps, Solid State Fuel Pump, 12V, 4-7PSI, NO filter, NO Straight Fitting.
- €102.00 (excl. VAT)
- Add to cart
- Facet pump kit, 12 V pump and fittings 40106KIT
- SOLID STATE PUMPS
- Facet Fuel Pumps, Solid State Fuel Pump Kit cpl. with fitting and filter. 12V, 4-7PSI, Self-Priming - to 30.5 cm of Fuel Lift.
- €118.00 (excl. VAT)
- Add to cart
- Facet pump 40164
- SOLID STATE PUMPS
- €125.00 (excl. VAT)
- Add to cart
- Kit, Output Terminal 41461
- DELCO REMY ALTERNATORS & SPARE PARTS
- Kit, Output Terminal 30SI. Length: 33.7mm. Stud Size: 1/4-28. Notes: positive output terminal.
- €11.00 (excl. VAT)
- Add to cart
- Air inlet 46400-181
- DELSTAR SPARE PARTS
- Delstar 180 Series. To be used with elbow 46900-180
- €39.00 (excl. VAT)
- Add to cart
- Cover plate air intake for Delstar 200 and 250 Series 46400-203
- DELSTAR SPARE PARTS
- Cover plate air intake for Delstar 200 and 250 Series.
- Read more
- Air inlet for Delstar 300 Series 46400-214
- DELSTAR SPARE PARTS
- Diameter 3 inchCOVER WITH AIR SCOPE RECTIFIER END DX 300
-
€48.00 (excl. VAT)€45.60 (excl. VAT) - Add to cart
- Cover plate air intake for Delstar 160 Series 46400-1610
- DELSTAR SPARE PARTS
- Delstar 160 Serie
- €24.00 (excl. VAT)
- Add to cart
- Delstar Cover plate 170-Series 46400-1700
- DELSTAR SPARE PARTS
- Cover plate, Delstar 170-Series.
- €19.00 (excl. VAT)
- Add to cart
- Cover plate air intake 46400-1710
- DELSTAR SPARE PARTS
- Cover plate air intake, Delstar 170-Series.
- €24.00 (excl. VAT)
- Add to cart
- Plastic Elbow 46900-180
- DELSTAR SPARE PARTS
- Plastic elbow to be used on an air-intake. DelStar, 90°
- €92.50 (excl. VAT)
- Add to cart
- Cole Hersee Battery Isolator 48070
- COLE HERSEE MISCELLANEOUS
- Cole Hersee 3-stud battery isolator (1 Input, 2 Battery Banks) 70A. The amp rating is the maximum alternator rating. For use with alternators that do knot have a built-in regulator.Three studs (6.4mm), 2 mounting holes (7.2mm). Size: 127 x 82.6 x 71 mm.
- €81.00 (excl. VAT)
- Add to cart
- Cole Hersee Battery Isolator 48090
- COLE HERSEE MISCELLANEOUS
- Cole Hersee 3-stud battery isolator (1 Input, 2 Battery Banks) 90A. The amp rating is the maximum alternator rating. For use with alternators that do not have a built-in regulator.Three studs (6.4mm), 2 mounting holes (7.2mm). Size: 165 x 82.6 x 71 mm.
- €93.00 (excl. VAT)
- Add to cart
- Cole Hersee Battery Isolator 48120
- COLE HERSEE MISCELLANEOUS
- Cole Hersee 3-stud battery isolator (1 Input, 2 Battery Banks) 120A. The amp rating is the maximum alternator rating. For use with alternators that do not have a built-in regulator.Three studs (6.4mm), 2 mounting holes (7.2mm). Size: 152.4 x 122.2 x 84.9 mm.
- €152.00 (excl. VAT)
- Add to cart
- Cole Hersee Battery Isol. 48161
- COLE HERSEE MISCELLANEOUS
- Cole Hersee 3-stud battery isolator (1 Input, 2 Battery Banks) 250A. Schottky diodes.For use with alternators that do not have a built-in regulator. Three studs (6.4mm), 2 mounting holes (7.2mm). Size: 215 x 122.2 x 86.5 mm.
- Read more
- Cole Hersee solenoid 48530
- COLE HERSEE HEAVY DUTY & CONTINUOUS DUTY
- Cole Hersee Smart Battery Isolators prevent loads on auxiliary battery from draining the starting battery.More flexible than traditional battery isolators. Simple to install – connect to starting battery, auxiliary battery and ground. Works with all types of alternators. Smaller and lighter than traditional isolators. There are no efficiency losses due to diodes. Allows bi-directional charging from the alternator or from shore power. Reduces the load on the charging system by not connecting the auxiliary battery until the primary battery is charged to 13.2V which extends the life of charging components. LED status indicator. Optional start assist with addition of a momentary switch allows the auxiliary batter to assist the starting batter.Quiescent current 5mA typical, 8mA maximum.
- Read more
- Cole Hersee solenoid 48785
- COLE HERSEE HEAVY DUTY & CONTINUOUS DUTY
- Cole Hersee standard solid state relay. 85A, 9V-31V DC.9 - 31V DC, 85A continuous or 175A intermittent.Low On resistance of .005ΩLow control current of .02A (max) means lighter wires, smaller harnesses.On/Off control voltage must be identical to the system voltage.Wide temperature operating range -40°C to + 85°C without derating.Protected from transient voltage spikes or surges.
- €139.00 (excl. VAT)
- Add to cart
- Delco Remy Replacement Alternator 48961
- DELCO REMY ALTERNATORS & SPARE PARTS
- Alternator, replaces Delco Remy, Delco 10DN, 24V - 30AUsed a seperate regulator. Berman part number DR-08, Set point: 27.5 Volt.Regulator terminal ID: F - 2 - 3 - 4.
- €310.00 (excl. VAT)
- Add to cart
- Cole Hersee switch 50001
- COLE HERSEE OTHER SWITCHES
- Cole Hersee Push-Pull switch. Normally Off, 20A. Heavy Duty.20A at 12V DC, 6 - 36V. Two screw terminals.
- €34.00 (excl. VAT)
- Add to cart
- Cole Hersee switch 50036
- COLE HERSEE OTHER SWITCHES
- Cole Hersee Push-Pull Switch, 12V, 2 Positions, DPST, Two Speed Axle Shift Switch. Female Bullet Terminals for Wire Connections, red plastic knob.Used with 9283 Terminal Block Limit Switch and 40102 Cable and Connector Assembly
- €15.00 (excl. VAT)
- Add to cart
- Leece Neville holder 52720
- PRESTOLITE / LEECE-NEVILLE ALTERNATORS & SPARE PARTS
- Leece Neville, Brush Holder for starters including springs.
- €38.00 (excl. VAT)
- Add to cart
- Nippon Denso Original Solenoid 053400-1572
- NIPPON DENSO STARTERS & SPARE PARTS, SOLENOIDS
- 24V original Nippon Denso solenoid.
-
€99.00 (excl. VAT)€69.30 (excl. VAT) - Add to cart
- Denso Terminal Block Package 053480-7560
- STARTERS & SPARE PARTS MISCELLANEOUS
- Terminal Block Package for 246-starters. S-terminal M5 x 0.8
- €5.00 (excl. VAT)
- Add to cart
- Cole Hersee switch 55014
- COLE HERSEE TOGGLE SWITCHES
- Cole Hersee Toggle Switch, 12-36V, 2 Positions, SPST. Amps: 25 at 12V, Mounting: 15/32-32 Threaded Stem. Number of Terminals: 2, number of Positions: 2 (Off-On).
- Read more
- Cole Hersee switch 55015
- COLE HERSEE TOGGLE SWITCHES
- Cole Hersee Toggle Switch, 12-36V, 2 Positions, SPDT. Amps: 25 at 12V, 15A at 24V.Mounting: 15/32-32 Threaded Stem, Number of Terminals: 3.Number of Positions: 2 (On-On).
- €26.50 (excl. VAT)
- Add to cart
- Cole Hersee switch 55019
- COLE HERSEE TOGGLE SWITCHES
- Cole Hersee Toggle Switch, 12-36V, 3 Positions, DPDT. Amps: 25 at 12V, 15A at 24V.Mounting: 15/32-32 Threaded Stem. Number of Terminals: 6.Number of Positions: 3 (On-Off - Off).
- Read more
- Cole Hersee switch 55020
- COLE HERSEE TOGGLE SWITCHES
- Cole Hersee Toggle Switch, 12-36V, 2 Positions, SPDST Momentary. Amps: 25 at 12V, 15A at 24V. Mounting: 15/32-32 Threaded Stem.Number of Terminals: 2 screw. Number of Positions: 2 (Off - Moment. On).
- €16.00 (excl. VAT)
- Add to cart
- Cole Hersee switch 55021
- COLE HERSEE TOGGLE SWITCHES
- Cole Hersee, Toggle Switch, 12-36V, 3 Positions, SPDT. Amps: 25 at 12V, 15A at 24V.Mounting: 15/32-32 Threaded Stem. Number of Terminals: 3 screw.Number of Positions: 3 (Mom.On-Off-Mom.On).
- €15.00 (excl. VAT)
- Add to cart
- Cole Hersee switch 55046
- COLE HERSEE TOGGLE SWITCHES
- Cole Hersee, Toggle Switch, 12-36V, 3 Positions, DPDT reversing polarity. Amps: 25 at 12V, 15A at 24V. Mounting: 15/32-32 Threaded Stem.Number of Terminals: 4 blade. Number of Positions: 3 (Mom. On-Off -Mom.On).Forward / reverse switch for use with permanent magnet motors.
- €23.00 (excl. VAT)
- Add to cart
- Cole Hersee switch 55054
- COLE HERSEE TOGGLE SWITCHES
- Cole Hersee, Toggle Switch, 12-36V, 3 Positions, DPDT momentary. Amps: 25 at 12V, 15A at 24V. Mounting: 15/32-32 Threaded Stem. Number of Terminals: 6 screw.Number of Positions: 3 (Mom.On-Off-Mom.On).
- Read more
- Cole Hersee switch 55055
- COLE HERSEE TOGGLE SWITCHES
- Cole Hersee, Toggle Switch, 12-36V, SPST.Amps: 25 at 12V, 15A at 24V. Mounting: 15/32-32 Threaded Stem. Number of Terminals: 2 blade.Number of Positions: 2 (On-Off).
- €13.00 (excl. VAT)
- Add to cart