Hotstart Engine Heating EVRHEAT 1900W 120V NEMA PLUG EVR20-10191D11-N00
€860.00 (excl. VAT)
EVR20 1900W 120V 110F 96 CORD 5-20P NEMA PLUG
The EVR20, a 1900W 120V coolant preheater, is Hotstart’s latest innovation in engine heating technology, designed to maintain optimal temperatures for marine and power generation diesel and gas engines. This cutting-edge EVRHEAT Series 20 ensures engine longevity and performance with the following features:
- Enhanced safety: Equipped with a coolant fluid level detector, the EVRHEAT Series 20 automatically shuts down heating to prevent the risk of dry fire.
- Extended service life: Built-in sensors continuously monitor coolant temperature, adjusting the heater unit’s function accordingly to minimize wear and tear, resulting in a lifespan of 10-15 years.
- Energy efficiency: The EVRHEAT Series 20 optimizes energy usage by regulating coolant temperature and activating/deactivating as needed, delivering up to 45% more efficiency compared to standard thermosiphon (TPS) and CTM heaters.
- Water resistance: With an IP65 rating, the EVRHEAT Series 20 provides adequate protection against water, making it suitable for installations in environments with water proximity.
- Simplified installation and operation: Featuring a built-in adjustable swivel inlet hose barb, the EVRHEAT Series 20 facilitates easy installation, even in confined spaces. Its indicator lights offer quick status updates for operational convenience.
- Certified for safety: The EVRHEAT Series 20 holds both UKCA and UL certifications, ensuring compliance with industry standards.
This advanced heating solution represents a significant advancement in engine heating technology, offering unparalleled safety, efficiency, and longevity.
Available on backorder
Description
At a glance, users can monitor the current status of the heater through indicator lights, ensuring engines remain within their optimal temperature range for smooth startups and reduced emissions.
Troubleshooting is simplified with the EVRHEAT Series 20. In case of a fault, the system promptly detects and deactivates to prevent any damage, minimizing heater downtime, repair expenses, and warranty claims. Clear fault indicators on the display assist users in swiftly identifying and resolving issues in the field.
The EVRHEAT Series 20 features quick response controls, employing solid-state technology to react to fluid temperature changes as small as 1 °F. This ensures enhanced temperature consistency and eliminates bothersome low-temperature alarms.
Installation becomes effortless with the EVR20, thanks to its adjustable 180° swivel inlet hose barb. This design accommodates plumbing requirements in tight spaces, allowing for easier field retrofits.
The combination of solid-state temperature controls and a debris-resistant forced circulation pump results in an exceptionally durable engine heating solution. It boasts up to 45% greater efficiency compared to standard thermosiphon (TPS) heaters, leading to a lower total cost of ownership.
Efficiency and performance are critical in engine heating systems. While delivering essential benefits to organizations relying on onsite power generation, inefficient solutions can drain resources through excessive electrical costs and frequent repairs. Comparing the Hotstart EVRHEAT Series 20 to other models such as TPS, CB, and CTM can provide valuable insights into optimizing efficiency and performance.
For detailed specifications and dimensions, refer to the system and coolant sections. Additionally, installation instructions are available for further guidance.
Dimensions
Specifications
SYSTEM
- Phase: Single-phase
- Voltage: 120V | 280V | 240V
- Ingress: IP66
- Min./Max. Ambient Temp.: -31 – 113 °F (-35 – 45 °C)
- Certification: UL C/US Listed CE / UKCA
- Plug type: NEMA | Schuko | Uniterminated
- Cord Length: 8ft. or 2.4m
- Engine Displacement: Up to 20L
COOLANT
- Fluid Type: Water | Coolant mix (50% water/50% glycol)
- Heat Power: 1.4 kW | 1.9 kW | 2.5 kW
- Set Temp: 110 °F (43 °C)
- High Limit Temp: 167 °F (75 °C)
- Flow: 1.5 gpm @ 3.5 ft H2O (5.6781 L/min @ 1.067 m H2O)
- Inlet/Outlet: 0.625” (16 mm) hose barb 0.625” (16 mm) hose barb
Note: Additional inlet/outlet hose barb sizes are available.
Installation
Additional information
| Weight | 2.5 kg |
|---|---|
| Phase | Single-phase |
| Voltage | 120V |
| Wattage | 1.9kW |
| Engine Displacement | up to 15 L (915 CID) |
| Cord Length | 8in. (2.4 m) |
