Hotstart Engine Heating EVRHEAT 1900W 120V NEMA PLUG EVR20-10191D11-N00
EVR20 1900W 120V 110F 96CORD 5-20P NEMA PLUGHotstart’s New EVRHEAT Series 20 Heating System is a forced circulation coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in marine and power generation applications. This range is the latest advancement in the field of engine heating, and it comes with the following features:
Increased safety – EVRHEAT Series 20 come with a detector for coolant fluid levels and shut down heating automatically to prevent the danger of dry fire.
Longer life-time service – The built sensors continuously measure coolant temperature and modulate the function of the heater unit accordingly. This way the heater suffers less wear and tear and can serve for 10-15 years.
Power efficiency – By continuously regulating coolant temperature and switching on-off when needed, EVRHEAT Series 20 save electricity. Up to 45% more efficient than standard thermosiphon (TPS) and CTM heaters.
Water-resistant – Coming with IP65 Rating, the EVRHEAT Series 20 is adequately resistant against water in places where water is present near installation.
Simplified installation and operation – With a built-in adjustable swivel inlet hose barb, EVRHEAT Series 20 can be installed with no difficulty in confined areas. The indicator lights give operation crew quick status information immediately.
UKCA Certified, UL Certified.
Available on backorder
Contact us about the possibilities for a subsequent delivery.
Description
At a glance, users can monitor the current status of the heater through indicator lights, ensuring engines remain within their optimal temperature range for smooth startups and reduced emissions.
Troubleshooting is simplified with the EVRHEAT Series 20. In case of a fault, the system promptly detects and deactivates to prevent any damage, minimizing heater downtime, repair expenses, and warranty claims. Clear fault indicators on the display assist users in swiftly identifying and resolving issues in the field.
The EVRHEAT Series 20 features quick response controls, employing solid-state technology to react to fluid temperature changes as small as 1 °F. This ensures enhanced temperature consistency and eliminates bothersome low-temperature alarms.
Installation becomes effortless with the EVR20, thanks to its adjustable 180° swivel inlet hose barb. This design accommodates plumbing requirements in tight spaces, allowing for easier field retrofits.
The combination of solid-state temperature controls and a debris-resistant forced circulation pump results in an exceptionally durable engine heating solution. It boasts up to 45% greater efficiency compared to standard thermosiphon (TPS) heaters, leading to a lower total cost of ownership.
Efficiency and performance are critical in engine heating systems. While delivering essential benefits to organizations relying on onsite power generation, inefficient solutions can drain resources through excessive electrical costs and frequent repairs. Comparing the Hotstart EVRHEAT Series 20 to other models such as TPS, CB, and CTM can provide valuable insights into optimizing efficiency and performance.
For detailed specifications and dimensions, refer to the system and coolant sections. Additionally, installation instructions are available for further guidance.
Dimensions
Specifications
SYSTEM
- Phase: Single-phase
- Voltage: 120V | 280V | 240V
- Ingress: IP66
- Min./Max. Ambient Temp.: -31 – 113 °F (-35 – 45 °C)
- Certification: UL C/US Listed CE / UKCA
- Plug type: NEMA | Schuko | Uniterminated
- Cord Length: 8ft. or 2.4m
- Engine Displacement: Up to 20L
COOLANT
- Fluid Type: Water | Coolant mix (50% water/50% glycol)
- Heat Power: 1.4 kW | 1.9 kW | 2.5 kW
- Set Temp: 110 °F (43 °C)
- High Limit Temp: 167 °F (75 °C)
- Flow: 1.5 gpm @ 3.5 ft H2O (5.6781 L/min @ 1.067 m H2O)
- Inlet/Outlet: 0.625” (16 mm) hose barb 0.625” (16 mm) hose barb
Note: Additional inlet/outlet hose barb sizes are available.
Installation
Additional information
| Weight | 2.48 kg |
|---|---|
| Phase | Single-phase |
| VENDOR CODE | EVR20-10191D11-N00 |
| Voltage | 120V |
| Wattage | 1.9kW |
| Engine Displacement | up to 15 L (915 CID) |
| Cord Length | 8in. (2.4 m) |
