-
- Thermostat 140°C 2050-140
- THERMOSTATIC VALVES
- Thermostat 140°F / 60°C
- €259.00 (excl. VAT)
- Add to cart
-
- Aluminium Hatch 6 inch Original OEM 211769
- GAUGE HATCHES
- Manhole with Body Diameter 225mm Base Diameter 240mm
- Read more
-
- Vacuum Transducer AVR116-595
- MISCELLANEOUS
- €259.00 (excl. VAT)
- Add to cart
-
- Hotstart Block Heater for Cummins 6CT 8.3L, Case/IH 830 Engines CUC-152FP
- ENGINE IN-BLOCK HEATERS
- Hotstart In-block Heater CUC-152FP for Cummins Engines complete with 2-wire w/ground 6’ (1.8m) HPN cord and plug. Application : Replaces 57.8mm core plug on right rear side of engine.
- €235.20 (excl. VAT)
- Add to cart
-
- Murphy Level Maintainer Original OEM LM301
- MURPHY LEVEL SWITCHES
- The LM301 Level Maintainer automatically adds oil to the crankcase as needed to keep the lube level normal. LM301 base model comes as a level maintainer with low switch contacts for low level shutdown or alarm. Four wires, SPDT. Technical Data
- Read more
-
- SESCO Oil Immersion Heater 1″ NPT OE650200-000
- FUEL & LUBE OIL HEATER
- 500W 240V 2.0A 1"NPT Oil Immersion HeaterOE650200-000 lube oil heater is installed within the engine's oil pan to maintain the warmth and viscosity of the oil when the engine is shut down. Cold oil tends to thicken, making it challenging to pump. By preheating the oil, it ensures smooth circulation to crucial engine wear points upon start-up. This proactive measure minimizes engine wear and facilitates smoother starts, ultimately extending the life of the battery.
- €382.20 (excl. VAT)
- Add to cart
-
- SESCO Union Pump 230V 38L/min PRP228052-012
- MISCELLANEOUS
- 230V 50Hz 38 L/min Union Pump
- €770.00 (excl. VAT)
- Add to cart
-
- Sesco Spring Starter Original OEM SPRS-01
- SPRING STARTERS
- Reliable spring starter for medium-sized diesel and gas engines. The Spring Starter Midi SDC011-1P offers battery-free starting—perfect for remote, off-grid, or emergency use. Compact, durable, and easy to install. Key Features: -No battery or wiring required -Rugged and maintenance-free -Ideal for engines up to mid-range capacity Technical Data
- €1,988.00 (excl. VAT)
- Add to cart
-
- Sesco Spring Starter Original OEM SPRS-03
- SPRING STARTERS
- Reliable spring starter for medium-sized diesel and gas engines. The Spring Starter Midi SDC013-1P offers battery-free starting—perfect for remote, off-grid, or emergency use. Compact, durable, and easy to install. Key Features: -No battery or wiring required -Rugged and maintenance-free -Ideal for engines up to mid-range capacity Technical Data
- Read more
-
- Sesco Spring Starter Original OEM SPRS-04
- SPRING STARTERS
- Reliable spring starter for medium-sized diesel and gas engines. The Spring Starter Midi SDC014-1P offers battery-free starting—perfect for remote, off-grid, or emergency use. Compact, durable, and easy to install. Key Features: -No battery or wiring required -Rugged and maintenance-free -Ideal for engines up to mid-range capacity Technical Data
- Read more
-
- Sesco Spring Starter Original OEM SPRS-05
- SPRING STARTERS
- Reliable spring starter for medium-sized diesel and gas engines. The Spring Starter Midi SDC015-1P offers battery-free starting—perfect for remote, off-grid, or emergency use. Compact, durable, and easy to install. Key Features: -No battery or wiring required -Rugged and maintenance-free -Ideal for engines up to mid-range capacity Technical Data
- Read more
-
- Sesco Spring Starter Original OEM SPRS-06
- SPRING STARTERS
- Reliable spring starter for medium-sized diesel and gas engines. The Spring Starter Midi SDC016-1P offers battery-free starting—perfect for remote, off-grid, or emergency use. Compact, durable, and easy to install. Key Features: -No battery or wiring required -Rugged and maintenance-free -Ideal for engines up to mid-range capacity Technical Data
- Read more
-
- Thermosiphon Heating System TPS Tank Heaters 2.5L TPS052GT10-000
- ENGINE COOLANT HEATERS
- Heater 500W 240V 100.4-120.2°F / 38°C-49°C
- €246.00 (excl. VAT)
- Add to cart
-
- Thermosiphon Heating System TPS Tank Heaters 2.5L TPS052GT12-A00
- ENGINE COOLANT HEATERS
- Adjustable/Fixed Thermostat. Light Housing. Assembled with a built-in thermostat and 1.3 mtr. power cord. Coolant Volumes up to 12 Liter. 2.1 Amps, 500W, Engine Displacement: 2.5L Technical Data
- €328.00 (excl. VAT)
- Add to cart
-
- Thermosiphon Heating System TPS Tank Heaters 5.7L TPS102GT8-000
- ENGINE COOLANT HEATERS
- 1000W, 240V, 80.6-100.4°F / 27-38°C Adjustable/Fixed Thermostat. Light Housing. Assembled with a built-in thermostat and 1.3 mtr. power cord. Coolant Volumes up to 12 Liter. Technical Data
- €172.20 (excl. VAT)
- Add to cart
-
- Thermosiphon Heating System TPS Tank Heaters 5.7L TPS102GT10-000
- ENGINE COOLANT HEATERS
- TPS Model, 100.4-120.2°F / 38-49°C, Adjustable/Fixed Thermostat, Single Phase, Engine Displacement: 350CID 5.7L, 1000W, 4.2 Amps, 240 V, Light Housing. Assembled with a built-in thermostat and 1.3 mtr. power cord. Coolant Volumes up to 12 Liter. Technical Data
- €281.00 (excl. VAT)
- Add to cart
-
- Thermosiphon Heating System TPS Tank Heaters 5.7L TPS102GT12-000
- ENGINE COOLANT HEATERS
- Fixed Thermostat. Light Housing. Assembled with a built-in thermostat and 1.3 mtr. power cord. Coolant Volumes up to 12 Liter. Technical Data
- €172.20 (excl. VAT)
- Add to cart
-
- Thermosiphon Heating System TPS Tank Heaters 5.7-8.2L TPS152GT8-000
- ENGINE COOLANT HEATERS
- 240V, 1500W, 6.3 Amps, 27-38°C / 80.6-100.4°F Adjustable/Fixed Thermostat. Light Housing. Assembled with a built-in thermostat and 1.3 mtr. power cord. Coolant Volumes up to 12 Liter. Technical Data
- €328.00 (excl. VAT)
- Add to cart
-
- Thermosiphon Heating System TPS Tank Heaters 5.7-8.2L TPS152GT10-000
- ENGINE COOLANT HEATERS
- TPS Model, Single Phase, Engine Displacement: 38-49°C / 100-120°F Adjustable/Fixed Thermostat., 350 – 500CID, 5.7 – 8.2L, 1500W, 6.3 Amps, 240V. Light Housing. Assembled with a built-in thermostat and 1.3 mtr. power cord. Coolant Volumes up to 12 Liter. Technical Data
- €276.00 (excl. VAT)
- Add to cart
-
- Thermosiphon Heating System TPS Tank Heaters 5.7-8.2L TPS152GT12-000
- ENGINE COOLANT HEATERS
- Adjustable/Fixed Thermostat. Light Housing. Assembled with a built-in thermostat and 1.3 mtr. power cord. Coolant Volumes up to 12 Liter. Technical Data
- €172.20 (excl. VAT)
- Add to cart
-
- Thermosiphon Heating System TPS Tank Heaters 8.2-11.5L TPS202GT8-000
- ENGINE COOLANT HEATERS
- Adjustable/Fixed Thermostat. Light Housing. Assembled with a built-in thermostat and 1.3 mtr. power cord. Coolant Volumes up to 12 Liter. Technical Data
- €179.20 (excl. VAT)
- Add to cart
-
- Thermosiphon Heating System TPS Tank Heaters 8.2-11.5L TPS202GT10-000
- ENGINE COOLANT HEATERS
- Adjustable/Fixed Thermostat. Light Housing. Assembled with a built-in thermostat and 1.3 mtr. power cord. Coolant Volumes up to 12 Liter. Technical Data
- €276.00 (excl. VAT)
- Add to cart
-
- Thermosiphon Heating System TPS Tank Heaters 8.2-11.5L TPS202GT12-000
- ENGINE COOLANT HEATERS
- Adjustable/Fixed Thermostat. Light Housing. Assembled with a built-in thermostat and 1.3 mtr. power cord. Coolant Volumes up to 12 Liter. Technical Data
- €179.20 (excl. VAT)
- Add to cart
-
- Volvo Engine Block Heater Hotstart VT6-101
- ENGINE IN-BLOCK HEATERS
- Part Number: VT6-101 Engine Model: TD60, TD61, TD70, TD71, TD100, TD101, VE10, TD120, TD121 120 V Watts: 1000 Application Information: Mounts into threaded opening on eft side of engine. Heat Shield Required: No Technical Data
- €261.80 (excl. VAT)
- Add to cart
-
- Murphy EL150K1 Level Switch
- MURPHY LEVEL SWITCHES
- FW Murphy Liquid level switch EL150K1 The L150 Series Level Swichgage® instrument is a combination liquid level gage and low-limit switch; each unit includes: (1) a chamber with pivotal float (2) an indicating dial with pointer (3) a low-level contact. When properly installed and maintained, the float operates the pointer which, in turn, both indicates level during normal operation and closes a switching circuit if the level falls to the low-limit set point. Technical Data
- €191.00 (excl. VAT)
- Add to cart
-
- Murphy EL150EX Level Switch
- MURPHY LEVEL SWITCHES
- FW Murphy Liquid Level Switch EL150EX. The EL150EX Liquid Level Switch® instrument is an explosion-proof combination liquid level gauge and low level switch. The instrument includes: (1) a chamber with a rotating float, (2) a dial with pointer, and (3) a low level contact. When properly installed and maintained, the float operates the pointer which in turn both indicates the level during normal operation and closes a switching circuit when the level drops to the low limit set point. The EL150EX has a fixed set point. When properly installed, the unit mounts at your desired liquid level. The set point cannot be tampered with. The primary use of the EL150EX is for engine cooling systems, peak or expansion tanks, condenser radiator or vapor phase systems, pressurized or atmospheric systems. The EL150EX Liquid Level Swichgage® instrument can also be used to monitor lubricating oil, hydraulic fluid, or diesel fuel reservoirs and to activate and/or deactivate alarms at a predetermined minimum level. This instrument is designed for low pressure systems with a maximum of 25 psi (172 kPa) [1.72 bar]. Snap-in Switch: SPDT rated 10A @ 125 VAC; 0.5A @ 125VDC; 10A 30VDC. Sand cast aluminum housing, painted body; 304 stainless steel float; tempered glass lens. Wires to terminal block. CSA certified for Class I, Division I, Groups C…
- €878.00 (excl. VAT)
- Add to cart
-
- Volvo Engine Block Heater Hotstart PF152-007-WOC
- ENGINE IN-BLOCK HEATERS
- Part Number: PF152-007 without cord Engine Model: D9 Voltage:240 V Watts: 1500 Application Information: Replaces oval shaped plate on right side of engine. Heat Shield Required: No
- €389.00 (excl. VAT)
- Add to cart
-
- MAN Engine Immersion Heater PF122-003
- ENGINE IN-BLOCK HEATERS
- Part Number: PF122-003 Engine Model: D2840, D2842, D2848 240 V Watts: 1250 Application Information: Replace oval shaped plate in lower water pipe on right side of engine. Heat Shield Required: No
- €280.00 (excl. VAT)
- Add to cart
-
- MAN Engine Immersion Heater PF152-006
- ENGINE IN-BLOCK HEATERS
- Part Number: PF152-006 Engine Model: D2866, D2876 240 V Watts: 1500 Application Information: Replace 3 bolt plate on left side of engine. May require adapter if 3 bolt opening is not available on engine. Consult customer service. Heat Shield Required: No
- €323.40 (excl. VAT)
- Add to cart
-
- Solenoid Valve 52X04160GM
- SOLENOIDS
- 24V, 7W, PSI:VAC, Hz DC We supply original high-quality PeterPaul solenoid valves with a wide variety of sizes and a range of control options over the flow of liquids and gases suited for all industrial and medical applications. See additional information below for specifications. You can contact us as well for consultation and request a quote.
- Read more
-
- Murphy LR857 Level Switch
- MURPHY LEVEL SWITCHES
- Automatically Maintains Lube Level. Low Level Switches. Models to Fit Varied Applications Technical Data
- Read more
-
- Murphy L129 Level Switch
- MURPHY LEVEL SWITCHES
- The L129 Series Lube Level Swichgage is a combined lube level indicator and adjustable limit switch for low and high levels. It protects against low oil levels or excessive levels from overfilling, fuel leakage, or water seepage into the crankcase. - Check lube levels without shutdown - Suitable for engines, pumps, and compressors - Combination indicator gauge with high and low limit switch - Float-operated Technical Data
- €246.00 (excl. VAT)
- Add to cart
-
- Murphy L129CK1 Level Switch
- MURPHY LEVEL SWITCHES
- Murphy L129CK1 Level Switch The L129 Series Lube Level Swichgage® instrument is a combination lube level indicating gage and adjustable low and high limit switches. It provides protection against low oil level or high level caused by overfill or fuel or water seepage into the crankcase. The L129CK1 was designed for applications requiring a three-wire, above ground electrical circuit. It features ungrounded contacts and a conduit hub to protect electrical wiring. Options are available for both models. Check Lube Level Without Shutting Down. Use On Engines, Pumps, And Compressors. Technical Data
- €343.00 (excl. VAT)
- Add to cart
-
- Solenoid Valve H22M9DEM 12V
- SOLENOIDS
- 12V, Hz:DC, Watts: 9.5, PSI:5000 Hz:DC, Watts:9.5, PSI:5000 We supply original high-quality PeterPaul solenoid valves with a wide variety of sizes and a range of control options over the flow of liquids and gases suited for all industrial and medical applications. See additional information below for specifications. You can contact us as well for consultation and request a quote.
- €196.45 (excl. VAT)
- Add to cart
-
- Solenoid Valve 12V H22G9DEM
- SOLENOIDS
- Hz DC, Watts 9.5, PSI 3000 Hz DC, Watts 9.5, PSI 3000 We supply original high-quality PeterPaul solenoid valves with a wide variety of sizes and a range of control options over the flow of liquids and gases suited for all industrial and medical applications. See additional information below for specifications. You can contact us as well for consultation and request a quote.
- €287.00 (excl. VAT)
- Add to cart
-
- Solenoid Valve 24V H22G9DEM
- SOLENOIDS
- Hz DC, Watts 9.5, PSI 3000 Peter Paul Solenoid Valve 24V H22G9DEM We supply original high-quality PeterPaul solenoid valves with a wide variety of sizes and a range of control options over the flow of liquids and gases suited for all industrial and medical applications. See additional information below for specifications. You can contact us as well for consultation and request a quote.
- €199.00 (excl. VAT)
- Add to cart
-
- Solenoid Valve 24V H22G9DGM
- SOLENOIDS
- 24V, Hz:DC, 9.5W, PSI 3000, BAR:320, Orifice: 0.793mm We supply original high-quality PeterPaul solenoid valves with a wide variety of sizes and a range of control options over the flow of liquids and gases suited for all industrial and medical applications. See additional information below for specifications. You can contact us as well for consultation and request a quote.
- €210.00 (excl. VAT)
- Add to cart
-
- Murphy LM300 Level Switch
- MURPHY LEVEL SWITCHES
- The LM300 Level Maintainer automatically adds oil to the crankcase as needed to keep the lube level normal. LM300 base model comes as a level maintainer only (no switches). Technical Data
- Read more
-
- Murphy DF755 Hydrostatic Head Level Switch
- MURPHY LEVEL SWITCHES
- The DF series are diaphragm-operated hydrostatic head pressure level switches. A pressure sensitive diaphragm operates a snap-switch that can be wired directly to electric pilot circuits to control pumps at predetermined levels. Typical application is to start and stop electric driven pump(s) to maintain tank levels. It is also applicable to engine-driven pumps.DF755 is suitable for atmospheric tanks in a non-hazardous area. The SPDT snap-switch for the DF755 is preset for a 4 in. (102 mm) differential in liquid level. Technical Data
- Read more
-
- Murphy BLS1 Level Switch
- MURPHY LEVEL SWITCHES
- The Murphy Bilge Level Switch BLS1 is constructed of materials not affected by marine atmospheres; Aluminum or Bronze body and cover, Buna-N diaphragm. NOTE: A pilot relay may be used for higher contact ratings (see Typical Wiring Diagram).Features: Operates Bilge Pumps or Alarms Remote Switch and Moving Parts Kept Unaffected by Corrosion Aluminum Body and Cover Technical Data
- Read more
-
- Solenoid Valve 23JK7XEM
- SOLENOIDS
- We supply original high-quality PeterPaul solenoid valves with a wide variety of sizes and a range of control options over the flow of liquids and gases suited for all industrial and medical applications. You can contact us as well for consultation and request a quote.
- €125.00 (excl. VAT)
- Add to cart
-
- Heater Wiring PHC-1
- MISCELLANEOUS
- PHC1 Retaining Clamp
- Read more
-
- Harness Y-cord braided 14mm 51.25404.6005
- MISCELLANEOUS, SPACE AND BATTERY HEATERS
- Harness Y-cord braided 14mm 51.25404.6005 Heater Wiring, Electrical rating: 1800Watt-120V, 15 Apm/2400Watt-240V, 10Amp Harness Y-cord braided 14mm 51.25404.6005 Heater Wiring, Electrical rating: 1800Watt-120V, 15 Apm/2400Watt-240V, 10Amp
- €288.00 (excl. VAT)
- Add to cart
-
- Tank heater KWV-3000-240-50/60
- ENGINE COOLANT HEATERS
- 240V, 50/60Hz, 3000W, 13.3A, Phase 1, Thermostat: adjustable With pump
- €1,217.00 (excl. VAT)
- Add to cart
-
- Murphy LS200 Level Switch
- MURPHY LEVEL SWITCHES
- Designed for harsh gas compressor scrubber applications, the LS200 Liquid Level Switches feature a robust design that trips on rising liquid level only. With both electric and pneumatic models available, the instruments screw directly into the vessel or can be mounted via an external float chamber. The nickel-plated body provides enhanced corrosion protection while the 304 stainless steel float operates in 0.55 specific gravity and heavier fluids. Additional features include: Rated for 2000 psi (13.8 MPa) [138 bar] working pressure Listed for Class I, Div. 1, Grp. C & D locations Canadian registered Stainless steel models available for corrosive atmospheres The LS200 Series replaces the FW Murphy Series L1200 Liquid Level Switches. The MSLS (Scrubber Level System) replaces the LS200 high-level shut-down switch with the MLS-020 magnetic level switch. Technical Data
- Read more
-
- Volvo Engine Block Heater Hotstart VT6-102
- ENGINE IN-BLOCK HEATERS
- Part Number: VT6-101 Engine Model: TD60, TD61, TD70, TD71, TD100, TD101, VE10, TD120, TD121 240 V Watts: 1000 Application Information: Mounts into threaded opening on eft side of engine. Heat Shield Required: No Technical Data
- €261.80 (excl. VAT)
- Add to cart
-
- Volvo Engine Block Heater Hotstart PF121-002
- ENGINE IN-BLOCK HEATERS
- Part Number: PF121-002 Engine Model: D12C After Serial #250502 120 V Watts: 1250 Application Information: Replaces oval shaped plate on right side of engine. Heat Shield Required: Yes Technical Data
- €396.00 (excl. VAT)
- Add to cart
-
- Pipe mount kit LM500
- MURPHY LEVEL SWITCHES
- €54.00 (excl. VAT)
- Add to cart
-
- Isov Pneumatic Valve N200-P
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N200-P air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Pneumatic -Bore size/Flange Size: 2 in – 50.8 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- €698.00 (excl. VAT)
- Add to cart
-
- ISOV Pneumatic Valve N400-P
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N400-P air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Pneumatic -Bore size/Flange Size: 6 in – 152.4 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- €2,579.00 (excl. VAT)
- Add to cart
-
- ISOV Pneumatic Valve N600-P
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N600-P air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Pneumatic -Bore size/Flange Size: 6 in – 152.4 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- Read more
-
- ISOV Pneumatic Valve N800-P
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N800-P air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Pneumatic -Bore size/Flange Size: 8 in – 203.2 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- Read more
-
- ISOV Valve Pneumatic N1268
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N1286-P air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Pneumatic -Bore size/Flange Size: 11 in – 279.4 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- Read more
-
- Wiring harness BPC-62 240V/13A
- MISCELLANEOUS, SPACE AND BATTERY HEATERS
- CORD ASM POWER CORD 1.8 m 240V Wiring harness Max electrical rating 3120W, 240V-13A, not for interrupting current
- €83.00 (excl. VAT)
- Add to cart
-
- FW Murphy LM500 Lube Level Maintainer
- MURPHY LEVEL SWITCHES
- The FW Murphy LM500 model maintains the crankcase oil level of an engine, pump or compressor. Adjusted to the correct running oil level, the LM500 will replenish oil as it is used. The low level switch will alarm and/or shut down the equipment if the supply oil is lost and the equipment continues to use oil. Direct Mount (DM) capable Eliminates under/overfill due to “human error” See oil level and condition without shutting down Simple installation Automatically maintains lube level Low level, 3-wire, snap-action switch Positive sealing Thumb-Valve™
- €241.00 (excl. VAT)
- Add to cart
-
- Volvo Engine Block Heater Hotstart PF151-005
- ENGINE IN-BLOCK HEATERS
- Part Number: PF151-005 Engine Model: D12C After Serial #250502 120 V Watts: 1500 Application Information: Replaces oval shaped plate on right side of engine. Heat Shield Required: Yes Technical Data
- €449.00 (excl. VAT)
- Add to cart
-
- Thermostat 2050-185
- THERMOSTATIC VALVES
- SERVICE PART, PART OF THERMOSTATIC VALVE, 185°F / 85°C
- €259.00 (excl. VAT)
- Add to cart
-
- Thermostat 2050-120
- THERMOSTATIC VALVES
- Thermostat 120.2°F / 49°C PART OF THERMOSTATIC VALVE
- €259.00 (excl. VAT)
- Add to cart
-
- Thermostat 1060-100 38°C
- THERMOSTATIC VALVES
- €200.00 (excl. VAT)
- Add to cart
-
- Thermostat 1050-100
- THERMOSTATIC VALVES
- €180.00 (excl. VAT)
- Add to cart
-
- Thermostat 2050-100
- THERMOSTATIC VALVES
- 100.4°F / 38°C Diameter 5.7 cm PART OF THERMOSTATIC VALVE
- €259.00 (excl. VAT)
- Add to cart
-
- Thermostat 2096-120
- THERMOSTATIC VALVES
- FPE Thermostat 120.2°F / 49°C Fits Thermostatic Control Valve 2” NPT 38°C SE201
- €259.00 (excl. VAT)
- Add to cart
-
- Thermostat 49 °C
- THERMOSTATIC VALVES
- €180.00 (excl. VAT)
- Add to cart
-
- Thermostat 70°C
- THERMOSTATIC VALVES
- €200.00 (excl. VAT)
- Add to cart
-
- Volvo Engine Block Heater Hotstart PF151-007-WOC
- ENGINE IN-BLOCK HEATERS
- Part Number: PF151-007 Engine Model: D9 120 V Watts: 1500 Application Information: Replaces oval shaped plate on right side of engine. Heat Shield Required: No Technical Data
- €286.30 (excl. VAT)
- Add to cart
-
- Volvo Engine Block Heater Hotstart PF122-002
- ENGINE IN-BLOCK HEATERS
- Part Number: PF122-002 Engine Model: D12C After Serial #250502 240 V Watts: 1250 Application Information: Replaces oval shaped plate on right side of engine. Heat Shield Required: Yes Technical Data
- €415.00 (excl. VAT)
- Add to cart
-
- Volvo Engine Block Heater Hotstart PF152-005
- ENGINE IN-BLOCK HEATERS
- Part Number: PF152-005 Engine Model: D12C After Serial #250502 240 V Watts: 1500 Application Information: Replaces oval shaped plate on right side of engine. Heat Shield Required: Yes Technical Data
- €383.00 (excl. VAT)
- Add to cart
-
- Thermostat 82°C
- THERMOSTATIC VALVES
- €200.00 (excl. VAT)
- Add to cart
-
- Tank heater LWV9000-380-3-ST/A3
- FUEL & LUBE OIL HEATER
- Heater with steel housing 380V, 9000W, Phases 3, Thermostat: Adjustable
- Read more
-
- Thermosiphon Engine Heater Hotstart WL320410-000
- ENGINE COOLANT HEATERS
- WL series with Thermostat 100.4-120.2°F 38-49°C, 2000W 480 Volts, 3 Phase, Conduit Connection, Weathertight Enclosure
- €1,058.40 (excl. VAT)
- Add to cart
-
- Thermosiphon Engine Heater Hotstart CB115410-200
- ENGINE COOLANT HEATERS
- With thermostat, Engine Displacement: 350 – 500CID, 5.7 – 8.2L. Phases:1, 480V, 1500W, 3.1 Apms Thermosiphon Engine Heater Hotstart CB115410-200
- €889.00 (excl. VAT)
- Add to cart
-
- Thermosiphon Engine Heater Hotstart CB120210-200
- ENGINE COOLANT HEATERS
- Thermosiphon Engine Heater Hotstart CB120210-200 240V, 2000W, 1 Phase, 8.3 Amps, Engine Displacement: 8.2 – 9.8L With Thermostat
- €619.50 (excl. VAT)
- Add to cart
-
- Solenoid 52J8DGM
- SOLENOIDS
- 24V, Hz:DC, 7W, 6.5 bar, orifice 1/16"*1/16" 12V-DC, 7W, 1/16 orifice, 100 PSI We supply original high-quality PeterPaul solenoid valves with a wide variety of sizes and a range of control options over the flow of liquids and gases suited for all industrial and medical applications. You can contact us as well for consultation and request a quote.
- €108.00 (excl. VAT)
- Add to cart
-
- Solenoid Valve H22G9GM
- SOLENOIDS
- 24V, Hz:DC, 9.5W, PSI 3000, orifice 1/32*1/32 We supply original high-quality PeterPaul solenoid valves with a wide variety of sizes and a range of control options over the flow of liquids and gases suited for all industrial and medical applications. See additional information below for specifications. You can contact us as well for consultation and request a quote.
- Read more
-
- Solenoid 55HH8XGB-24V DC
- SOLENOIDS
- 7W, Max.pressure 6.5 Bar, Conn 2*1/8'' We supply original high-quality PeterPaul solenoid valves with a wide variety of sizes and a range of control options over the flow of liquids and gases suited for all industrial and medical applications. You can contact us as well for consultation and request a quote.
- €260.00 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart 1500 Watt 240V no Thermostat CB115200-000
- ENGINE COOLANT HEATERS
- Tank Heater Hotstart 1500 Watt 240V CB115200-000 Without Thermostat, 1 Phase, Coolant Volume: 6.5-8.5L, 240V, 6.3 Amps
- Read more
-
- FW Murphy LM500-TF Level Maintainer
- MURPHY LEVEL SWITCHES
- The LM500-TF model includes a test feature that confirms both the float and switch are operating correctly with a single press of the test button. Direct Mount (DM) capable Eliminates under/overfill due to “human error” See oil level and condition without shutting down Simple installation Automatically maintains lube level Low level, 3-wire, snap-action switch Positive sealing Thumb-Valve™ The LM500-TF model includes a test feature that confirms both the float and switch are operating correctly with a single press of the test button. Direct Mount (DM) capable Eliminates under/overfill due to “human error” See oil level and condition without shutting down Simple installation Automatically maintains lube level Low level, 3-wire, snap-action switch Positive sealing Thumb-Valve™
- €255.00 (excl. VAT)
- Add to cart
-
- Solenoid Valve 220V/50Hz H22M9DEM
- SOLENOIDS
- 220V, 7,7W 50Hz Orifice 0.025 PSI 5000 We supply original high-quality PeterPaul solenoid valves with a wide variety of sizes and a range of control options over the flow of liquids and gases suited for all industrial and medical applications. See additional information below for specifications. You can contact us as well for consultation and request a quote.
- €196.45 (excl. VAT)
- Add to cart
-
- Hotstart Engine Coolant Heater CTM25210-A00
- ENGINE COOLANT HEATERS
- CTM 2500W 240V 100.4-120.2°F / 38-49°C Comes with cord and no plug (unterminated). Hotstart’s CTM HOTflow® heating system is a coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in stationary land power, marine, and construction equipment applications.
- €765.00 (excl. VAT)
- Add to cart
-
- Hotstart Engine Coolant Heater CTM15210-A00
- ENGINE COOLANT HEATERS
- CTM 1500W 240V 100.4-120.2°F / 38-49°C Comes with cord and no plug (unterminated). Hotstart’s CTM HOTflow® heating system is a coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in stationary land power, marine, and construction equipment applications.
- €765.00 (excl. VAT)
- Add to cart
-
- Hotstart Engine Coolant Heater CTM10210-E00
- ENGINE COOLANT HEATERS
- 240V, 1000W, Phase: 1, Thermostat 98.6-120.2°F / 37-49°C. Hotstart’s CTM HOTflow® heating system is a coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in stationary land power, marine, and construction equipment applications.
- €765.00 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart with Thermostat CB115210-200
- ENGINE COOLANT HEATERS
- Tank Heater Hotstart with Thermostat 100-120°F / 37.8-48.9°C CB115210-200 1500W, 240V, 100-120F, 1 Phase, 6.3 Amps Engine Displacement: 350 – 500CID, 5.7 – 8.2L
- €724.15 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart CB120208-200
- ENGINE COOLANT HEATERS
- Tank Heater Hotstart CB120208-200 With Thermostat, 1 Phase, Coolant Volume: 8.5 - 10L, 240V, 2000W, 8.3 Apms Tank Heater Hotstart CB120208-200
- €681.80 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart CB125200-000
- ENGINE COOLANT HEATERS
- €337.40 (excl. VAT)
- Add to cart
-
- Engine Heater 1000W OVT/3
- ENGINE COOLANT HEATERS, ENGINE IN-BLOCK HEATERS
- Material: aluminum Dimensions: 22*9*10 cm Pump flow: 900l/hr. Rated voltage: 110/220V; 50/60Hz Heating tube life: 8000 hours Pump life: 5000 hours
- €110.40 (excl. VAT)
- Add to cart
-
- Engine Heater 2000W OVT/1
- ENGINE COOLANT HEATERS, ENGINE IN-BLOCK HEATERS
- Car engine block heater, engine coolant heater Waterproof, compact TUV FCC, RoHS and CE compliant Rated voltage: 220 – 240/110 – 120V; 50/60Hz Built-in pump flow rate: 1200l/hr. Life of pump 5000hrs. Life of heating pipe 8000hrs.
- €100.80 (excl. VAT)
- Add to cart
-
- Engine Heater 3000W OVT/5
- ENGINE COOLANT HEATERS, ENGINE IN-BLOCK HEATERS
- Truck Block Heater TUV, CE, RoHS and FCC compliant Material: Aluminum Size: 22cm*9cm*8cm Built-in Pump life: 5000 hours Heating tube life 8000 hours
- €103.20 (excl. VAT)
- Add to cart
-
- Pressure Vacuum Hatch 1320
- GAUGE HATCHES
- Pressure setting 17,2. Vacuum setting 1,7 mbar The Model 1320 are traditional thief hatches, with the pressure and vacuum relief mechanism housed inside the cover of the unit, with a standard 8” API Flange. The Model 1320 comes in sweet service configuration, and activation pressures of 17,2 , 34,4 and 69 mbar.
- €673.00 (excl. VAT)
- Add to cart
-
- Valve SE101 1”NPT
- THERMOSTATIC VALVES
- Temperature: 100.4°F / 38°C Pipe size: 1''NPT 92*95*153 PSI: 150 Pressure rating: 10.3 Bar Suitable for water/coolant and oil
- €204.00 (excl. VAT)
- Add to cart
-
- Valve SE111 3/4” NPT
- THERMOSTATIC VALVES
- 100.4°F / 38°C Pipe size: 3/4'' NPT 92*95*153 PSI 150 Pressure: 10.3 Bar Two-Way Thermostatic Control Valve Suitable for a Wide Range of Temperatures Replaceable, Non-Adjustable, Tamper-Proof Thermostats Self-Contained Unit Compact, Heavy-Duty, and Rugged Construction Operates in Any Orientation Suitable for water/coolant and oil
- €204.00 (excl. VAT)
- Add to cart
-
- Horizontal industial tank Heater with pump TR12-325A
- ENGINE COOLANT HEATERS, MISCELLANEOUS
- Horizontal industrial tank Heater with pump 50Hz, Capacitor 2.5uF, Imax: 0.25A, Head 4m, Thermostat 30-85°, IP 42, 240V, 3000W, Phase: 1 Direct replacement for TOPSTART TSW 5023013000MC 230V 3000W For customization inquiries please contact us.
- €713.74 (excl. VAT)
- Add to cart
-
- Horizontal industrial tank Heater with pump Engine Heater TR12-225A
- ENGINE COOLANT HEATERS
- Horizontal industrial tank Heater with pump Engine Heater TR12-225A 50Hz, Capacitor 2.5uF, Imax: 0.25A, Head 4m, Thermostat 30-85°, IP 42, 240V, 2000W, Phase: 1 For customization inquiries please contact us.
- €677.16 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart WL340410-200
- ENGINE COOLANT HEATERS
- With Thermostat, 480V, 4000W, Phases:3, 4.8 Amps. Engine Displacement: 800 – 1350CID, 13.1 – 22.1L HOTSTART’s WL heaters are the three phase option for dependable heating of original equipment manufacturers' engines. The WL series features the same pressure die-cast aluminum tank, built-in high limit thermostat and optional flow-through thermostat as our line of CB/CL heaters. The WL adds an all metal mounting bracket and heat power up to 5 kW, making it ideal for heavy-duty large engine applications. Technical Data
- €1,806.00 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart CB125708-200
- ENGINE COOLANT HEATERS
- Tank Heater Hotstart CB125708-200 With Thermostat, 1 Phase, Coolant Volume: 10-13.5L, 277V, 2500W, 9 Apms
- €569.10 (excl. VAT)
- Add to cart
-
- Tank Heater CL130200-100
- ENGINE COOLANT HEATERS
- Without Thermostat, 1 Phase, Coolant Volume: 13.5-17, 240V, 3000W, 12.5 Amps
- €514.50 (excl. VAT)
- Add to cart
-
- Industrial Immersion Heater Hotstart E01511W-151A-00
- FUEL & LUBE OIL HEATER
- Thermostat range 16-27°C / 60-80°F The Hotstart Immersion Heater E01511W-151A-00 delivers 1.5kW of efficient heating at 120V, single-phase, designed for industrial use. Equipped with a 16-27°C (approximately 60-80°F) thermostat range, it ensures precise temperature control for engine fluids. Featuring a 2” NPT thread for easy installation, this reliable heater minimizes engine wear and enhances cold-weather performance.
- €772.10 (excl. VAT)
- Add to cart
-
- Tank Heater CL130700-100
- ENGINE COOLANT HEATERS
- Without Thermostat, 1 Phase, Coolant Volume: 13.5-17, 277V, 3000W, 10.8 Amps
- €706.30 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart CL140700-100
- ENGINE COOLANT HEATERS
- Tank Heater Hotstart CL140700-100 Without Thermostat, 1 Phase, Coolant Volume: 17-22.5L, 277V, 4000W, 14.4 Apms
- €783.30 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart with power cord SB120110-200
- ENGINE COOLANT HEATERS
- 2000W, 120V, 1 Phase, 16.7 Amps Engine displacement: 500 – 600CID, 8.2 – 9.8L With Thermostat, 2000W, 120V, 1 Phase, 16.7 Amps Engine displacement: 500 – 600CID, 8.2 – 9.8L
- €660.80 (excl. VAT)
- Add to cart
-
- Tank Heater CB1152XX-000
- ENGINE COOLANT HEATERS
- With Thermostat, 1 Phase, Coolant Volume: 6.5-8.5L, 240V, 1500W, 6.3 Amps
- Read more
-
- Tank Heater Hotstart CB125410-200
- ENGINE COOLANT HEATERS
- Tank Heater Hotstart CB125410-200 With Thermostat, 1 Phase, Coolant Volume: 6.5-8.5L, 480V, 2500W, 5.2 Apms
- €889.00 (excl. VAT)
- Add to cart
-
- Tank Heater Hotsart without Thermostat CB120200-000
- ENGINE COOLANT HEATERS
- Tank Heater Hotsart without Thermostat CB120200-000 240V, 2000W,1 Phase, 8.3 amps, Engine Displacement: 8.2 – 9.8L
- €364.70 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart 240V, 2500W, 10.4 Amps CB125208-200
- ENGINE COOLANT HEATERS
- Tank Heater Hotstart 240V, 2500W, With Thermostat 80.6-100.4°F / 27-38°C, 10.4 Amps CB125208-200 1 Phase, Coolant Volume: 10-13.5L
- €615.30 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart 277V, 2500W, 9 Apms CB125700-000
- ENGINE COOLANT HEATERS
- Tank Heater Hotstart CB125700-000 Without Thermostat, 1 Phase, Coolant Volume: 10-13.5L, 277V, 2500W, 9 Apms
- €366.80 (excl. VAT)
- Add to cart
-
- Tank Heater CL130708-200
- ENGINE COOLANT HEATERS
- Tank Heater With Thermostat, 1 Phase, Coolant Volume: 13.5-17, 277V, 3000W, 10.8 Amps
- €715.40 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart No Thermostat CL140200-100
- ENGINE COOLANT HEATERS
- Tank Heater Hotstart No Thermostat CL140200-100 240V 4000W, 1 Phase, 16.7 Amps
- €514.50 (excl. VAT)
- Add to cart
-
- Tank Heater Hotstart with Thermostat CL140708-200
- ENGINE COOLANT HEATERS
- Tank Heater Hotstart with Thermostat 80.6-100.4°F / 27°C - 38°C 1 Phase, Coolant Volume: 17-22.5L, 277V, 4000W, 14.4 Apms
- €772.80 (excl. VAT)
- Add to cart
-
- Hotstart In-block Heater DD-152-003-WOC
- ENGINE IN-BLOCK HEATERS
- Hotstart In-block Heater DD-152-003-WOC For Detroit Diesel Engine model 6-71 Without water cooled air compressor. Mounts in the oval shaped plate on engine block. 240V, 1500W .
- €205.00 (excl. VAT)
- Add to cart
-
- Tank Heater Hotsart 3000W 240V CL130208-200
- ENGINE COOLANT HEATERS
- Hotstart Tank Heater 3000W 240V 80.6-100.4°F / 27°C - 38°C
- €772.80 (excl. VAT)
- Add to cart
-
- ISOV Electric Valve N400-E
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N400-E air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Electric -Bore size/Flange Size: 4 in - 101.6 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- €2,579.00 (excl. VAT)
- Add to cart
-
- ISOV Electric Valve N800-E
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N800-E air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Electric -Bore size/Flange Size: 8 in - 203.2 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- Read more
-
- Isov Failsafe Valve N400-FS
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N400-FS air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Mechanical Failsafe -Bore size/Flange Size: 4 in – 101.6 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- €2,579.00 (excl. VAT)
- Add to cart
-
- Isov Failsafe Valve N600-FS
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N600-FS air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Mechanical Failsafe -Bore size/Flange Size: 6 in – 152.4 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- Read more
-
- Isov Failsafe Valve N800-FS
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N800-FS air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Mechanical Failsafe -Bore size/Flange Size: 8 in – 203.2 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- Read more
-
- Isov Remote Manual Valve N400-M
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N400-M air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Manual -Bore size/Flange Size: 4 in – 101.6 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- €2,579.00 (excl. VAT)
- Add to cart
-
- Isov Remote Manual Valve N600-M
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N600-M air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Manual -Bore size/Flange Size: 6 in – 152.4 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- Read more
-
- Isov Remote Manual Valve N800-M
- ISOV EMERGENCY SHUT OFF VALVES
- ISOV N800-M air shut off valve is a swing-gate, spring-operated air shut-off valve mounted in the air intake system. It works on impeding airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. -Control/Actuation: Manual -Bore size/Flange Size: 8 in – 203.2 mm We offer customization services to match your precise equipment requirements. Click the Request Quotation and Delivery Time button below to request support from our team.
- Read more
-
- Bubble Lens for Murphy Level Maintainer LM300 Series
- MURPHY LEVEL SWITCHES
- This is the bubble lens component of the Murphy Level Maintainer LM300 Series. For information on Level maintainer LM300, click here.
- €69.00 (excl. VAT)
- Add to cart
-
- Hotstart Immersion Heater E09021E-40NV-00
- FUEL & LUBE OIL HEATER
- HEATER COOLANT/OIL 240V 1PH 9KW ER 30
- €1,268.40 (excl. VAT)
- Add to cart
-
- Hotstart CSM Series HOTflow Heating System for 75-100L Engines CSM3120A-5A0
- ENGINE COOLANT HEATERS
- HOTSTART’s CSM HOTflow ® heating system is a coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in stationary land power, marine, construction equipment, and truck applications. CE-compliant/union pump configuration Average lead time for this unit 4-5 weeks after order confirmation.
- €3,028.00 (excl. VAT)
- Add to cart
-
- Murphy Repair kit OEM EL150K1-LC
- MURPHY LEVEL SWITCHES
- EL150K1-LC (Less Case) EL150K1 Switch inner part. Repair kit without red cover.
- €168.00 (excl. VAT)
- Add to cart
-
- Hotstart Grundfoss Glycol Pump 230V 50/60 Hz PRP228052-015
- MISCELLANEOUS
- Glycol Pump Grundfoss 230V 50/60 Hz CSM4120A-5A0-E Replacement Part 10GPM Union CE Certified, 50.8 cm Cord
- €908.00 (excl. VAT)
- Add to cart
-
- Murphy Dump Valve DVU150
- MURPHY LEVEL SWITCHES
- MURPHY DVU150 1800 PSI (12.4 MPa)The DVU Series are pneumatically controlled dump valves. The valves open and close automatically by pneumatic control from a Murphy L1200NDVOR or similar Murphy level controller and dump valve operator.The DVU series dump valves operate at 30–70 psi (207–483 kPa) [2.07–4.83 bar] and up to 2000 psi (13.8 MPa) [138 bar] vessel pressure (depending on the model).A key benefit of this design is a hex union that provides the ability to replace the seat without removing the valve from piping. Body Material: Electroless Nickel Plated 12L14 Carbon Steel. Internal Wetted Parts:Plug Seal: 90 Durometer UrethaneOther: 303 stainless steel; Electroless Nickel Plated 12L14 Carbon Steel. Technical Data
- Read more
-
- Murphy Dump Valve DVU175
- MURPHY LEVEL SWITCHES
- MURPHY DVU175 1800 PSI (12.4 MPa) The DVU Series are pneumatically controlled dump valves. The valves open and close automatically by pneumatic control from a Murphy L1200NDVOR or similar Murphy level controller and dump valve operator. The DVU series dump valves operate at 30–70 psi (207–483 kPa) [2.07–4.83 bar] and up to 2000 psi (13.8 MPa) [138 bar] vessel pressure (depending on the model).A key benefit of this design is a hex union that provides the ability to replace the seat without removing the valve from piping. Body Material: Electroless Nickel Plated 12L14 Carbon Steel. Internal Wetted Parts: Plug Seal: 90 Durometer UrethaneOther: 303 stainless steel; Electroless Nickel Plated 12L14 Carbon Steel. Technical Data
- Read more
-
- Murphy Dump Valve DVU2105
- MURPHY LEVEL SWITCHES
- MURPHY DVU2105 500 PSI (12.4 MPa) The DVU Series are pneumatically controlled dump valves. The valves open and close automatically by pneumatic control from a Murphy L1200NDVOR or similar Murphy level controller and dump valve operator.The DVU series dump valves operate at 30–70 psi (207–483 kPa) [2.07–4.83 bar] and up to 2000 psi (13.8 MPa) [138 bar] vessel pressure (depending on the model).A key benefit of this design is a hex union that provides the ability to replace the seat without removing the valve from piping. Body Material: Electroless Nickel Plated 12L14 Carbon Steel. Internal Wetted Parts:Plug Seal: 90 Durometer UrethaneOther: 303 stainless steel; Electroless Nickel Plated 12L14 Carbon Steel. Technical Data
- Read more
-
- Murphy Dump Valve DVU2115
- MURPHY LEVEL SWITCHES
- MURPHY DVU2115 1500 PSI (10.3 MPa)The DVU Series are pneumatically controlled dump valves. The valves open and close automatically by pneumatic control from a Murphy L1200NDVOR or similar Murphy level controller and dump valve operator.The DVU series dump valves operate at 30–70 psi (207–483 kPa) [2.07–4.83 bar] and up to 2000 psi (13.8 MPa) [138 bar] vessel pressure (depending on the model).A key benefit of this design is a hex union that provides the ability to replace the seat without removing the valve from piping. Body Material: Electroless Nickel Plated 12L14 Carbon Steel. Internal Wetted Parts:Plug Seal: 90 Durometer UrethaneOther: 303 stainless steel; Electroless Nickel Plated 12L14 Carbon Steel. Technical Data
- Read more
-
- Murphy Dump Valve DVU2120
- MURPHY LEVEL SWITCHES
- MURPHY DVU2120 2000 PSI (13.8 MPa)The DVU Series are pneumatically controlled dump valves. The valves open and close automatically by pneumatic control from a Murphy L1200NDVOR or similar Murphy level controller and dump valve operator.The DVU series dump valves operate at 30–70 psi (207–483 kPa) [2.07–4.83 bar] and up to 2000 psi (13.8 MPa) [138 bar] vessel pressure (depending on the model).A key benefit of this design is a hex union that provides the ability to replace the seat without removing the valve from piping. Body Material: Electroless Nickel Plated 12L14 Carbon Steel. Internal Wetted Parts:Plug Seal: 90 Durometer UrethaneOther: 303 stainless steel; Electroless Nickel Plated 12L14 Carbon Steel. Technical Data
- Read more
-
- Murphy Level Maintainer LM302
- MURPHY LEVEL SWITCHES
- The LM302 Level Maintainer automatically adds oil to the crankcase as needed to keep the lube level normal. LM302 base model comes as a level maintainer with two switches for low and high level shutdown or alarm. Four wires, DPST, wired N.O. in normal operating ranges. Technical Data
- €805.00 (excl. VAT)
- Add to cart
-
- Murphy Level Maintainer LM303
- MURPHY LEVEL SWITCHES
- The LM303 Level Maintainer automatically adds oil to the crankcase as needed to keep the lube level normal. LM303 base model comes as a level maintainer with two switches for low and high level shutdown or alarm. Four wires, DPST, wired N.C. in normal operating ranges. Technical Data
- €859.00 (excl. VAT)
- Add to cart
-
- Murphy Level Maintainer LM304
- MURPHY LEVEL SWITCHES
- The LM304 Level Maintainer automatically adds oil to the crankcase as needed to keep the lube level normal. LM304 base model comes as a level maintainer with two switches. Alarm before shutdown on low level and shutdown on low-low level.Four wires, DPST, wired N.O. in normal operating ranges. Technical Data
- Read more
-
- Murphy Level Maintainer LM305
- MURPHY LEVEL SWITCHES
- The LM305 Level Maintainer automatically adds oil to the crankcase as needed to keep the lube level normal. LM305 base model comes as a level maintainer with two switches. Alarm before shutdown on low level and shutdown on low-low level. Four wires, DPST, wired N.C. in normal operating ranges. Technical Data
- Read more
-
- Hotstart Engine Heating EVRHEAT, 2500W 240V SCHUKO PLUG EVR20-10252D11-E00
- EVRHEAT SERIES
- EVR20 2500W 240V 110°F / 43.3°C 96CORD SCHUKO PLUGHotstart’s New EVRHEAT Series 20 Heating System is a forced circulation coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in marine and power generation applications. This range is the latest advancement in the field of engine heating, and it comes with the following features: Increased safety - EVRHEAT Series 20 come with a detector for coolant fluid levels and shut down heating automatically to prevent the danger of dry fire. Longer life-time service – The built sensors continuously measure coolant temperature and modulate the function of the heater unit accordingly. This way the heater suffers less wear and tear and can serve for 10-15 years. Power efficiency – By continuously regulating coolant temperature and switching on-off when needed, EVRHEAT Series 20 save electricity. Up to 45% more efficient than standard thermosiphon (TPS) and CTM heaters. Water-resistant – Coming with IP65 Rating, the EVRHEAT Series 20 is adequately resistant against water in places where water is present near installation. Simplified installation and operation – With a built-in adjustable swivel inlet hose barb, EVRHEAT Series 20 can be installed with no difficulty in confined areas. The indicator lights give operation crew quick status information immediately. UKCA Certified, UL Certified.
- Read more
-
- Hotstart Engine Heating EVRHEAT 1400W 120V NEMA PLUG EVR20-10141D11-N00
- EVRHEAT SERIES
- VR20 1400W 120V 110°F / 43.3°C 96CORD 5-15P NEMA PLUGHotstart’s New EVRHEAT Series 20 Heating System is a forced circulation coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in marine and power generation applications. This range is the latest advancement in the field of engine heating, and it comes with the following features: Increased safety - EVRHEAT Series 20 come with a detector for coolant fluid levels and shut down heating automatically to prevent the danger of dry fire. Longer life-time service – The built sensors continuously measure coolant temperature and modulate the function of the heater unit accordingly. This way the heater suffers less wear and tear and can serve for 10-15 years. Power efficiency – By continuously regulating coolant temperature and switching on-off when needed, EVRHEAT Series 20 save electricity. Up to 45% more efficient than standard thermosiphon (TPS) and CTM heaters. Water-resistant – Coming with IP65 Rating, the EVRHEAT Series 20 is adequately resistant against water in places where water is present near installation. Simplified installation and operation – With a built-in adjustable swivel inlet hose barb, EVRHEAT Series 20 can be installed with no difficulty in confined areas. The indicator lights give operation crew quick status information immediately. UKCA Certified, UL Certified.
- Read more
-
- Hotstart Engine Heating EVRHEAT 1900W 120V NEMA PLUG EVR20-10191D11-N00
- EVRHEAT SERIES
- EVR20 1900W 120V 110°F / 43.3°C 96CORD 5-20P NEMA PLUGHotstart’s New EVRHEAT Series 20 Heating System is a forced circulation coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in marine and power generation applications. This range is the latest advancement in the field of engine heating, and it comes with the following features: Increased safety - EVRHEAT Series 20 come with a detector for coolant fluid levels and shut down heating automatically to prevent the danger of dry fire. Longer life-time service – The built sensors continuously measure coolant temperature and modulate the function of the heater unit accordingly. This way the heater suffers less wear and tear and can serve for 10-15 years. Power efficiency – By continuously regulating coolant temperature and switching on-off when needed, EVRHEAT Series 20 save electricity. Up to 45% more efficient than standard thermosiphon (TPS) and CTM heaters. Water-resistant – Coming with IP65 Rating, the EVRHEAT Series 20 is adequately resistant against water in places where water is present near installation. Simplified installation and operation – With a built-in adjustable swivel inlet hose barb, EVRHEAT Series 20 can be installed with no difficulty in confined areas. The indicator lights give operation crew quick status information immediately. UKCA Certified, UL Certified.
- Read more
-
- Hotstart Engine Heating EVRHEAT 2500W 240V NEMA PLUG EVR20-10252D11-N00
- EVRHEAT SERIES
- EVR20 2500W 240V 110°F / 43.3°C 96CORD 6-15P NEMA PLUGHotstart’s New EVRHEAT Series 20 Heating System is a forced circulation coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in marine and power generation applications. This range is the latest advancement in the field of engine heating, and it comes with the following features: Increased safety - EVRHEAT Series 20 come with a detector for coolant fluid levels and shut down heating automatically to prevent the danger of dry fire. Longer life-time service – The built sensors continuously measure coolant temperature and modulate the function of the heater unit accordingly. This way the heater suffers less wear and tear and can serve for 10-15 years. Power efficiency – By continuously regulating coolant temperature and switching on-off when needed, EVRHEAT Series 20 save electricity. Up to 45% more efficient than standard thermosiphon (TPS) and CTM heaters. Water-resistant – Coming with IP65 Rating, the EVRHEAT Series 20 is adequately resistant against water in places where water is present near installation. Simplified installation and operation – With a built-in adjustable swivel inlet hose barb, EVRHEAT Series 20 can be installed with no difficulty in confined areas. The indicator lights give operation crew quick status information immediately. UKCA Certified, UL Certified.
- Read more
-
- Hotstart Engine Heating EVRHEAT 2500W 208V Unterminated EVR20-10258D11-A00
- EVRHEAT SERIES
- EVR20 2500W 208V 110°F / 43.3°C 96CORD UNTERMINATEDHotstart’s New EVRHEAT Series 20 Heating System is a forced circulation coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in marine and power generation applications. This range is the latest advancement in the field of engine heating, and it comes with the following features: Increased safety - EVRHEAT Series 20 come with a detector for coolant fluid levels and shut down heating automatically to prevent the danger of dry fire. Longer life-time service – The built sensors continuously measure coolant temperature and modulate the function of the heater unit accordingly. This way the heater suffers less wear and tear and can serve for 10-15 years. Power efficiency – By continuously regulating coolant temperature and switching on-off when needed, EVRHEAT Series 20 save electricity. Up to 45% more efficient than standard thermosiphon (TPS) and CTM heaters. Water-resistant – Coming with IP65 Rating, the EVRHEAT Series 20 is adequately resistant against water in places where water is present near installation. Simplified installation and operation – With a built-in adjustable swivel inlet hose barb, EVRHEAT Series 20 can be installed with no difficulty in confined areas. The indicator lights give operation crew quick status information immediately. UKCA Certified, UL Certified.
- Read more
-
- Hotstart Engine Heating EVRHEAT 2500W 208V UNTERMINATED EVR20-10258D11-B00
- EVRHEAT SERIES
- EVR20 2500W 208V 110°F / 43.3°C 96CORD UNTERMINATEDHotstart’s New EVRHEAT Series 20 Heating System is a forced circulation coolant preheater, developed to maintain optimal temperatures for diesel and gas engines in marine and power generation applications. This range is the latest advancement in the field of engine heating, and it comes with the following features: Increased safety - EVRHEAT Series 20 come with a detector for coolant fluid levels and shut down heating automatically to prevent the danger of dry fire. Longer life-time service – The built sensors continuously measure coolant temperature and modulate the function of the heater unit accordingly. This way the heater suffers less wear and tear and can serve for 10-15 years. Power efficiency – By continuously regulating coolant temperature and switching on-off when needed, EVRHEAT Series 20 save electricity. Up to 45% more efficient than standard thermosiphon (TPS) and CTM heaters. Water-resistant – Coming with IP65 Rating, the EVRHEAT Series 20 is adequately resistant against water in places where water is present near installation. Simplified installation and operation – With a built-in adjustable swivel inlet hose barb, EVRHEAT Series 20 can be installed with no difficulty in confined areas. The indicator lights give operation crew quick status information immediately. UKCA Certified, UL Certified.
- Read more
-
- Hotstart Coolant Heater with Thermostat 3000W 240V 38°C-49°C CL130210-200
- ENGINE COOLANT HEATERS
- Hotstart CL130210-200 Heater, with Thermostat 100.4-120.2°F / 38°C -49°C 3000W, 50HZ, 240V, 1PH, FOR PERKINS G710/G2710 KVA GENERATOR Used for G-760 Cummins Generator Ideal for large, heavy-duty engine applications.
- €772.80 (excl. VAT)
- Add to cart
-
- Murphy EL150K1-R2 Level Switch with IP55 Class
- MURPHY LEVEL SWITCHES
- EL150K1-R2 level switch with IP55 class
- €280.00 (excl. VAT)
- Add to cart
-
- High Output Alternator 24V 350A AA304-221421-230
- ALMOTT ALTERNATORS & SPARE PARTS
- Voltage: 24V Output: 350A Efficiency: more than 80% Mounting: J180 hinge Cooling: Ductless Speed Limit: 8000 RPM Power @ 2000 rpm: at 330A Weight: 24 kg Temperature Limits: Low: -40°C / High: 125°C Regulator: Remote Noise reduction: no
- Contact us to get your price
Powered by Landholm.io
